Application Tips PDF Print E-mail
 

Advantage Program Application Tips

With any new product or program, the user should know what the expectations are for the

product or program. The following Tips were created to assist the user in achieving

maximum results with the TurfPro product.

Advantage Program Application Tips

With any new product or program, the user should know what the expectations are for the

product or program. The following Tips were created to assist the user in achieving

maximum results with the TurfPro product.

TurfPro is a revolutionary humic-microbial growth stimulant product that works below

the surface of your turf. It is not a fertilizer but a readily available food source for your

turf and plants. Therefore, you will not see greener turf after the initial application as you

would with a conventional fertilizer. What you will see is:

 Increased turf vigor and health

 Dramatic increase in root mass and depth in weeks

 Increased color and growth after conventional fertility due to more effective

uptake and availability of nutrient sources applied

 Decrease in fertility requirements due to more effective plant uptake and usage

 Less pest and weeds due to healthier turf and greater stress resistance

 Faster recovery after agronomic and cultural practices

 Up to 50% less grow-in or establishment time required on projects or repairs

 Faster establishment of trees and plantings and lower mortality rates

 Improved customer satisfaction through consistent healthy turf and playing

conditions

TurfPro is simple to use and to apply. The following Tips will improve the effectiveness

of your results.

Application Tips

 To properly track the benefits of TurfPro, prior to first use, pull core samples of the turf

in the areas to be applied to measure current root depth and strength. Use of a large soil

probe is recommended. After core is removed, simply pull the turf at the top of the core

and measure where it separates from the rest of the soil. This process should be

duplicated at two weeks and again at four weeks after initial application. Usual results

will show an increased length of plug separation by as much as 1 to 2 inches after just

two weeks. Your results may very.

 Prior to mixing product into sprayer, shake container vigorously to completely mix

sediment up in container. Add ¾ of the contents of the container and add additional

water to container and shake again. This process will insure complete benefits of the

carbon-based nutrients.

 Safe for all plants and turf types. Product is to be applied to the soil and not the plant.

 Immediately after application, it would be optimal to apply 4-7 minutes of irrigation to

treated areas. However, watering within 24 hours of application is satisfactory. Follow

with normal nighttime irrigation or a minimum of ½ inch of rainfall.

 Though TurfPro has been found to be compatible with most chemicals, it isrecommended to apply TurfPro by itself or with a quality wetting agent to decrease soil

resistance and improve the effectiveness of the product by achieving penetration into the

thatch layer and root zone. Other soluble nutrients are acceptable but must be able to be

watered in immediately.

 TurfPro will not burn or damage turf even if applied to turf directly out of the

container.

 For bare spots, heavy traffic areas, weak turf due to pests or disease, affected areas may be treated using drench technique application of solution. A rate of 16-32 ounces of Turf

Pro to each gallon of water may be used.

 Since this product is totally organic, there are no re-entry restrictions after application of

this product.

 
< Prev   Next >
[ Back ]